Martin Exterior Linear Pro Cove QUAD
Martin Exterior Linear Pro Cove QUAD sú flexibilné, kompaktné, LEDkové architektonicke svetlá s vysokovýkonovou technológiou color boost v diskrétnom, ale robustnom obale. Doručujúc rovnomernú distribúciu svetla pri 100 stupňovom uhle lúča, sú ideálne pre nepriame osvetlenie stropov, stien a iných povrchov na štadiónoch a v arénach, výletných lodiach, zábavných parkoch, hoteloch, kasínach, mostoch, tuneloch a iných permanentných vnútorných aj vonkajších lokáciách.
Cove QUAD modely obsahujú homogenizované miešanie farieb s 8 LED/ft a integrovanou funkciou color boosting pre osvetlenie jednou farbou, alebo mixom farieb plnou silou. Každý kus je kalibrovaný pre dokonalú konzistenciu farby, vďaka čomu sú až do 3 krát jasnejšie než porovnatelné svetlá s nižšou spotrebou energie. Logické ovládanie RGBW je taktiež zabudované kde biela farba je automaticky vypočítaná.
Napchané inteligentnými funkciami, Cove QUAD ponúkajú dedikovaný kanál pre kontrolu teploty farby, ktorá presne nasleduje krivku čier...neho telesa, dovolujúc svetelným dizajnérom nastaviť ich obľúbenú teplotu farby. Integrovaná kontrola segmentov dovoľuje ovládanie svetiel na 15cm segmentoch, tvoriac organickejšie prechody medzi farbamy.
So silným zameraním na udržatelnosť, Cove QUAD sa dajú reťaziť pomocou kombinovaného energetického a dátového konektora, povolujúc dlhé svetlá pre jednoduchšie infraštruktúry. Jednoduchá nastavitelnosť uhla lúča robí zmeny dizajnu a úpravy na mieste hračkou a inteligentný dizajn montážneho panelu pasuje pre rozsah štandardných i na mieru vyrobených úchytov.
Úzky dizajn týhto svetiel ich robí ľahšími pre integráciu do architektonických prvkov s nižšími nárokmi. Všetky modely sú dostupné v dĺžkach 1 a 4 stôp.
VIAC
Martin Exterior Linear Pro Cove QUAD lights are flexible, compact, LED-based architectural fixtures featuring high output with color boost technology and discreet yet robust housings. They offer uniform light distribution with a 100 degree beam angle that’s perfect for striking indirect lighting of ceilings, walls and other surfaces in stadiums and arenas, cruise ships, theme parks, hotels, casinos, bridges, tunnels, or other permanent indoor or outdoor installations.
These lights feature homogenized color mixing with 8 LEDs/ft and an integrated color boosting feature for full powered illumination of a single color or mixed colors. Each unit is factory calibrated for superior color consistency, making them up to three times brighter than comparable fixtures, yet boasting lower total power consumption. Logic RGB control of the RGBW engine is also included where white is automatically calculated.
Packed with intelligent features, Cove QUAD models offer a dedicated color temperature control channel, which accurately follows the black body curve, empowering lighting designers to set their favorite default color temperature. Integrated segment control allows the fixtures to be controlled down to 6-inch (15 cm) segments, creating more organic and subtle color transitions.
With a high focus on sustainability, Cove QUAD models can be daisy-chained using a combined power and data connector, enabling long fixture runs for simpler infrastructures. Simple beam angle changeability makes late design changes and on-site adjustments easy, and a smart mounting plate design offers a variety of standard or custom bracket solutions.
The slim design of these lights makes them easier to integrate into architectural elements with less structural requirements. All models are available in either 1ft or 4ft linear lengths and are shipped in FSC certified packaging.
FEATURES
Color-calibrated QUAD color LEDs (8 LEDs/ft)
Homogenous color mixing
100° beam angle for indirect lighting applications
Dedicated color temperature control channel (1800K - 12000K)
Selectable segment modes (1, 4 or 8 segments)
Selectable power consumption (12W/10W/5W) per foot
Integrated multi-range power supply unit (PSU) 100-277V for long fixture runs
Hybrid power and data connector for easy daisy-chained configurations
DMX and RDM control
Integrated magnetic switch for local diagnostics
Rugged IP66 housing designed for permanent outdoor installations
Low weight 0.8 kg/ft (1.9 lbs/ft)
Compact design - 40mm (1.57 inch) width
PHYSICAL
Width: | 40 mm (1.57 inch.) |
Height: | 68 mm (2.67 inch) |
Length - 1 ft Version: | 312mm (1.02 ft) |
Length - 4 ft Version: | 1227mm (4.02 ft) |
Weight - 1 ft Version: | 0.85 kg (1.9 lbs) |
Weight - 4 ft Version: | 2.8 kg (6.2 lbs) |
DYNAMIC EFFECTS
Color mixing: | RGBW |
Color temperature control: | 1800K – 12000K in 50K steps (default 4000K) |
Intensity: | 0 - 100% |
Segment Control: | 0.5ft, 1 ft or full 4 ft fixture control |
CONTROL AND PROGRAMMING
Control systems: | DMX, RDM |
Control resolution: | 8-bit DMX individual color control |
User interface: | Magnetic button to call up fixture status and test fixture |
Stand-alone control: | Up to 20 scenes with individual fade/hold times |
DMX compliance: | USITT DMX512/1990 |
RDM compliance: | ANSI/ESTA E1.20 |
Dimmer Resolution: | 16-bit DMX control of intensity |
DMX channels 4ft: | 6/4/3/12/24 (standard/RAW/1 seg/4 seg/8 seg) |
DMX channels 1ft
: | 6/4/3/6 (standard/RAW/1 seg/2 seg) |
OPTICS
Light source: | QUAD color LED (8 LEDs per foot) |
Minimum LED lifetime: | 50 000 hours (to >70% luminous output)* |
Beam angle: | 100° |
Binning: | Tight color and flux binning |
Calibration: | Full Gamut Color Calibration (1 step MacAdam ellipse) |
*Figure obtained under manufacturer's test conditions
PHOTOMETRIC DATA
CRI (Color Rendering Index) : | >70 |
CCT: | 1800K – 12000K (default 4000K) |
Luminous output: | |
1 ft at 12W 4 ft at 12W
FULL: | 590 lumens 2520 lumens |
RED: | 200 lumens 1000 lumens |
GREEN: | 450 lumens 1880 lumens |
BLUE: | 90 lumens 420 lumens |
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
CONSTRUCTION
Housing: | Aluminum |
Finish: | Clear anodized (standard) or optional colors on request |
Front: | Clear polycarbonate |
Protection rating: | IP66 |
IK rating: | IK08 |
Effective Projected Area (EPA): | 0.04 m2 per ft |
Corrosion resistance: | C5 - very high corrosivity / Durability Range | High (ISO 12944-6) |
Vibration resistance: | 1.0g, Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31) |
INSTALLATION
Orientation: | Any |
Minimum distance to illuminated surfaces: | 0.1 m / 0.3 ft. |
ELECTRICAL
AC power: | 100-277 V nominal, 50/60 Hz |
Typical half-cycle RMS inrush current: | 0.35 A |
Power supply unit: | Auto-ranging electronic switch-mode |
Surge protection: | 4KV |
Power/data in/thru: | 8-pin custom connectors |
Idle power consumption: | 1ft length | 1.54 W, 4ft length | 2.30W (steady state, all LEDs at zero intensity) |
Max earth leakage: | 1ft length | 0.15 mA, 4ft length | 0.21 mA |
Maximum connected 4ft fixtures*: | 42 pcs (52 m /169 ft) @ 230V-277V |
Maximum total string length (cable + fixtures)*: | 150 m / 328 ft |
* Refer to system diagram for details on fixture run limitations
TYPICAL POWER AND CURRENT
12W mode: | |
100-240 V, 50/60 Hz: | 12 W per foot +/- 1 W, PF 0.95 +/- 0.05 |
277 V, 50/60 Hz: | 12 W per foot +/- 1 W, PF 0.90 +/- 0.05 |
10W mode: | |
100-240 V, 50/60 Hz: | 10 W per foot +/- 1 W, PF 0.95 +/- 0.05 |
277 V, 50/60 Hz: | 10 W per foot +/- 1 W, PF 0.90 +/- 0.05 |
5W mode: | |
100-240 V, 50/60 Hz: | 5 W per foot +/- 0.5W, PF 0.90 +/- 0.05 |
277 V, 50/60 Hz: | 5 W per foot +/- 0.5W, PF 0.70 +/- 0.05 |
Power figures are typical, not maximum. Measurements made at nominal voltage. Allow for +/- 10% deviation. PF = Power factor.
THERMAL
Cooling: | Convection |
Total heat dissipation (calculated, +/- 10%): | 41 BTU/hr. per foot |
Maximum ambient temperature: | 45° C (113° F)* |
Minimum ambient temperature: | -30° C (-22° F) |
*Above this temperature, the fixture regulates output to protect from overheating
ENVIRONMENTAL
RoHS: | Compliant |
REACH: | Compliant |
WEEE: | Compliant |
Proposition 65: | Compliant |
FSC: | Certified cardboard inlay and outer packaging |
Efficacy (max output): | 50 lm/W |
LWR*: | 706 lm/kg (316 lm/lb) |
*LWR = Lumen-to-Weight Ratio
APPROVALS
Global CB Certification/IECEE: | IEC 60598-2-5 (IEC 60598-1) |
EU safety: | EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493 |
EU EMC: | EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3 |
US safety: | ANSI/UL 1598 |
US EMC: | 47 CFR Part 15 Class B |
Canadian safety: | CSA C22.2 No. 250.0 |
Australia/NZ: | RCM |
India: | BIS IS 10322(Part5/section5) |
RELATED ITEMS
Martin Companion Cable: | P/N MAR-91616091 |
Martin Companion Cable (for firmware update over DMX): | Free download from www.martin.com |
ACCESSORIES
Glare shield, EL Pro 1ft set of 4: | P/N MAR-90570022 |
Glare shield, EL Pro, 4ft set of 4: | P/N MAR-90570023 |
Adjustable bracket EL Pro 10 pcs: | P/N MAR-90570025 |
Flange bracket EL Pro 10 pcs: | P/N MAR-90570026 |
Quick mount bracket EL Pro 10 pcs: | P/N MAR-90570027 |
Junction Box Power DMX to PD: | P/N MAR-91700019 |
Power DMX Cable PD PD 0.2M EU: | P/N MAR-91700004 |
Power DMX Cable PD PD 1M EU: | P/N MAR-91700005 |
Power DMX Cable PD PD 2.5M EU: | P/N MAR-91700006 |
Power DMX Cable PD PD 5M EU: | P/N MAR-91700007 |
Power DMX Cable PD PD 10M EU: | P/N MAR-91700008 |
Power DMX Cable 100M Roll EU: | P/N MAR-91700009 |
Power DMX Cable PD PD 0.2M US: | P/N MAR-91700010 |
Power DMX Cable PD PD 1M US: | P/N MAR-91700011 |
Power DMX Cable PD PD 2.5M US: | P/N MAR-91700012 |
Power DMX Cable PD PD 5M US: | P/N MAR-91700013 |
Power DMX Cable PD PD 10M US: | P/N MAR-91700014 |
End termination cap PD: | P/N MAR-91700015 |
Power DMX Cable 100M Roll US: | P/N MAR-91700016 |
Bulk connector PD female: | P/N MAR-91700017 |
Bulk connector PD male: | P/N MAR-91700018 |
ORDERING INFORMATION
Exterior Linear Pro cove QUAD 1ft: | P/N MAR-90570001 |
Exterior Linear Pro cove QUAD 4ft: | P/N MAR-90570004 |
VIAC